If you’re looking for a quick and delicious way to cook chicken tenders, a cast iron skillet is the perfect tool. Cast iron skillets are known for their ability to distribute heat evenly, allowing you to achieve a crispy and flavorful outer crust while keeping the inside moist and juicy. But how long should you cook chicken tenders in a cast iron skillet to ensure they are cooked through?

The cooking time for chicken tenders in a cast iron skillet will depend on the thickness of the meat and the desired level of doneness. As a general rule, you should cook chicken tenders for about 4-6 minutes per side. However, it’s important to note that cooking times may vary depending on the heat of your skillet and the size of your tenders.

Before cooking the chicken tenders, make sure to preheat your cast iron skillet over medium-high heat. Add a small amount of oil to the skillet and let it heat up for a minute or two. Then, carefully place the chicken tenders in the skillet, making sure not to overcrowd the pan.

Cook the chicken tenders for about 4-6 minutes on each side, or until they reach an internal temperature of 165°F (74°C). To check the temperature, you can use an instant-read thermometer inserted into the thickest part of the meat. Once the chicken tenders are cooked through, transfer them to a plate lined with paper towels to drain any excess oil. Serve them hot and enjoy!

Preparation of chicken tenders

Lodge Cast Iron Grill Pan, 10.25-inch
Lodge Cast Iron Grill Pan, 10.25-inch
$33.00
$19.90
Amazon.com
Amazon price updated: October 12, 2024 3:22 pm

Before cooking chicken tenders in a cast iron skillet, it is important to properly prepare them. Follow these steps to ensure your chicken tenders turn out delicious:

  1. Start by rinsing the chicken tenders under cold water and pat them dry with paper towels.
  2. Next, season the chicken tenders with salt, pepper, and any other desired spices or herbs. You can use a pre-made seasoning blend or create your own.
  3. If time allows, marinate the chicken tenders in the refrigerator for at least 30 minutes to enhance the flavor and ensure juiciness.
  4. While the chicken tenders are marinating, preheat your cast iron skillet over medium heat.
  5. Once the skillet is hot, add a small amount of oil or butter to prevent the chicken tenders from sticking.
  6. Carefully place the chicken tenders in the skillet, making sure to leave space between each tender to allow for even cooking.
  7. Cook the chicken tenders for about 4-5 minutes on each side, or until they are golden brown and cooked through. Use a meat thermometer to ensure the internal temperature reaches 165°F (74°C).
  8. Once cooked, remove the chicken tenders from the skillet and let them rest for a few minutes before serving. This will help retain their juices.
  9. Enjoy your deliciously cooked chicken tenders!

Remember, cooking times may vary based on the thickness of the chicken tenders, so it is always best to use a meat thermometer to ensure they are fully cooked. Now you are ready to use your cast iron skillet to make flavorful chicken tenders at home.

See also  Can you cook a spiral ham in an instant pot

Heating the cast iron skillet

Before cooking chicken tenders in a cast iron skillet, it’s important to properly heat the skillet to ensure even cooking and optimal flavor. Here are some steps to follow:

Step 1: Preheat the skillet

Place the cast iron skillet on the stovetop and turn the heat to medium-high. Allow the skillet to preheat for about 5 minutes so that it becomes hot enough to sear the chicken tenders.

Step 2: Add cooking oil

Once the skillet is preheated, add about a tablespoon of cooking oil such as vegetable oil or canola oil. Swirl the oil around the skillet to ensure it coats the bottom evenly.

Step 3: Heat the oil

Continue heating the skillet and oil for an additional 2 to 3 minutes, or until the oil is shimmering and hot. This helps create a non-stick surface and prevents the chicken tenders from sticking to the skillet.

Lodge Cast Iron Baker’s Skillet 10.25 inch
Lodge Cast Iron Baker’s Skillet 10.25 inch
$19.90
Amazon.com
Amazon price updated: October 12, 2024 3:22 pm

Step 4: Adjust heat if necessary

If the skillet becomes too hot and the oil starts to smoke, reduce the heat slightly. This will help maintain the ideal cooking temperature and prevent burning.

Once the cast iron skillet is properly heated, you’re ready to start cooking your chicken tenders. Remember to follow the recipe instructions specific to the cooking time and temperature for the best results.


Mueller Pre-Seasoned Heavy-Duty Healthy Cast Iron Skillet 10-inch, Cast Iron Pan, Dual Handles & Dual Pouring Lips, Safe across All Cooktops, Oven, BBQ, or Campfire
Mueller Pre-Seasoned Heavy-Duty Healthy Cast Iron Skillet 10-inch, Cast Iron Pan, Dual Handles & Dual Pouring Lips, Safe across All Cooktops, Oven, BBQ, or...
$19.99
Amazon.com
Amazon price updated: October 12, 2024 3:22 pm

Cooking chicken tenders on the skillet

Cooking chicken tenders on the skillet

Chicken tenders are a delicious and versatile option for a quick and easy meal. Cooking them on a cast iron skillet can give them a crispy and flavorful exterior while keeping the inside juicy and tender.

Victoria Cast Iron Skillet Large Frying Pan with Helper Handle Seasoned with 100% Kosher Certified Non-GMO Flaxseed Oil, 12 Inch, Black
Victoria Cast Iron Skillet Large Frying Pan with Helper Handle Seasoned with 100% Kosher Certified Non-GMO Flaxseed Oil, 12 Inch, Black
$24.99
$21.99
Amazon.com
Amazon price updated: October 12, 2024 3:22 pm

Ingredients:

  • 2 pounds of chicken tenders
  • 2 tablespoons olive oil
  • Salt and pepper to taste
  • Optional: additional seasonings like paprika, garlic powder, or Italian seasoning

Instructions:

  1. Preheat the cast iron skillet over medium-high heat.
  2. Season the chicken tenders with salt, pepper, and any additional seasonings of your choice.
  3. Add olive oil to the skillet and let it heat up for a minute.
  4. Carefully place the chicken tenders in the hot skillet, making sure they are not overcrowded. Cook them in batches if necessary.
  5. Cook the chicken tenders for about 3-4 minutes on each side, or until they are golden brown and cooked through. Use tongs to flip them halfway through cooking.
  6. Once cooked, remove the chicken tenders from the skillet and let them rest for a few minutes before serving.
  7. Enjoy your crispy and delicious chicken tenders!

Notes: Make sure to adjust the cooking time depending on the thickness of the chicken tenders. Thicker tenders may require a slightly longer cooking time.

Turning the chicken tenders

Once the chicken tenders have been cooking for about 3-4 minutes on one side, it’s time to flip them over. To ensure even cooking and a nice golden brown crust, use a pair of tongs to carefully turn each tender over.

See also  How to cook beef chuck tender steak

As you turn the chicken tenders, you may notice that the first side has developed a nice sear. This is exactly what you want to see! The sear helps to lock in the juices and adds an extra layer of flavor to the chicken.

Lodge L8SGP3 Cast Iron Square Grill Pan, Pre-Seasoned, 10.5-inch
Lodge L8SGP3 Cast Iron Square Grill Pan, Pre-Seasoned, 10.5-inch
$39.50
$22.23
Amazon.com
Amazon price updated: October 12, 2024 3:22 pm

After turning the chicken tenders, allow them to cook for another 3-4 minutes on the other side. The exact cooking time may vary depending on the thickness of the chicken tenders.

While the chicken tenders are cooking on the second side, you can use this time to prepare any sides or sauces to accompany the chicken. Once the tenders are cooked through, remove them from the skillet and let them rest for a few minutes before serving.

Important tips for turning chicken tenders:

  • Use tongs to carefully flip each chicken tender over.
  • Ensure the skillet is hot enough to create a nice sear on the chicken.
  • Let the chicken tenders cook for a few minutes on each side to ensure they are cooked through.
  • Allow the chicken tenders to rest for a few minutes before serving to retain their juices.

Checking the doneness of the chicken tenders

It is important to ensure that your chicken tenders are cooked through to a safe internal temperature, reaching 165°F (74°C) to eliminate any potential bacteria or foodborne illnesses. There are a few methods to check the doneness of the chicken tenders:

1. Visual inspection:

Take a closer look at the chicken tenders. They should have a golden brown crust on the outside. The color should be uniform, without any areas of raw or pink flesh.

2. Internal temperature:

Using a meat thermometer, insert it into the thickest part of the chicken tender, making sure it does not touch the bone. The thermometer should read 165°F (74°C) when the chicken tenders are done. If the temperature is lower, continue cooking until the desired temperature is reached.

SENSARTE Nonstick Grill Pan for Stove Tops, Versatile Griddle with Pour Spouts, Square Big Cooking Surface, Durable Skillet Indoor & Outdoor Grilling. PFOA Free, 9.5 Inch
SENSARTE Nonstick Grill Pan for Stove Tops, Versatile Griddle with Pour Spouts, Square Big Cooking Surface, Durable Skillet Indoor & Outdoor Grilling. PFOA...
$31.99
$29.99
Amazon.com
Amazon price updated: October 12, 2024 3:22 pm

3. Texture and firmness:

Gently press the chicken tender with a fork or tongs. It should feel firm and spring back slightly. If it feels mushy or soft, it needs more cooking time.

Remember, cooking times can vary depending on the thickness of the chicken tenders and the heat of your skillet. It is always better to use a meat thermometer to ensure the chicken is cooked to a safe temperature rather than relying solely on visual cues.

Serving the chicken tenders

Once the chicken tenders are cooked to perfection in the cast iron skillet, it’s time to serve them up and enjoy! Here are a few ideas for serving your delicious chicken tenders:

1. Platter

Arrange the chicken tenders on a platter and serve them as a main course. You can garnish the platter with fresh herbs like parsley or cilantro for a pop of color.

Utopia Kitchen Saute Fry Pan - Pre-Seasoned Cast Iron Skillet Set 3-Piece - Frying Pan - 6 Inch, 8 Inch and 10 Inch Cast Iron Set (Black)
Utopia Kitchen Saute Fry Pan - Pre-Seasoned Cast Iron Skillet Set 3-Piece - Frying Pan - 6 Inch, 8 Inch and 10 Inch Cast Iron Set (Black)
$44.99
$32.99
Amazon.com
Amazon price updated: October 12, 2024 3:22 pm

2. Sandwiches

Slice the chicken tenders and use them as fillings for sandwiches. You can add some lettuce, tomato, and your favorite condiments for a tasty and satisfying meal.

3. Salads

Chop the cooked chicken tenders and toss them with your favorite greens, vegetables, and dressings to make a delicious chicken salad. It’s a great option for a light and refreshing meal.

4. Wraps

Wrap the chicken tenders in tortillas along with some cheese, lettuce, and salsa for a quick and easy meal on the go. You can also add some avocado or sour cream for extra flavor.

See also  How to cook frozen breakfast sausage links

Regardless of how you choose to serve them, be sure to enjoy the crispy and flavorful chicken tenders that you’ve cooked to perfection in your cast iron skillet!

Q&A

How long should I cook chicken tenders in a cast iron skillet?

You should cook chicken tenders in a cast iron skillet for about 5 to 7 minutes per side. This will ensure that they are fully cooked and have a nice golden crust.

What temperature should I cook chicken tenders at in a cast iron skillet?

You should cook chicken tenders in a cast iron skillet over medium-high heat. This will allow them to cook evenly and develop a crispy exterior.

Can I use a cast iron skillet to cook frozen chicken tenders?

Yes, you can use a cast iron skillet to cook frozen chicken tenders. However, you may need to adjust the cooking time slightly to ensure they are fully cooked through. It’s best to defrost the chicken tenders first, if possible, for even cooking.

Should I add oil to the skillet when cooking chicken tenders?

Yes, you should add a small amount of oil to the skillet when cooking chicken tenders. This will help prevent them from sticking to the pan and create a nice crispy crust on the outside. Use an oil with a high smoke point, such as canola or vegetable oil.

How do I know when chicken tenders are cooked in a cast iron skillet?

You can check the doneness of chicken tenders by using a meat thermometer. The internal temperature should reach 165°F (74°C) to ensure they are fully cooked. Alternatively, you can cut into one of the tenders to check if the juices run clear and there is no pinkness in the center.

How long should I cook chicken tenders in a cast iron skillet?

Chicken tenders should be cooked in a cast iron skillet for about 5-7 minutes per side, or until they reach an internal temperature of 165°F (74°C).

What’s the best way to cook chicken tenders in a cast iron skillet?

The best way to cook chicken tenders in a cast iron skillet is to preheat the skillet over medium-high heat, add some oil or butter to the skillet, then place the chicken tenders in a single layer. Cook for about 5-7 minutes per side, or until they reach an internal temperature of 165°F (74°C).