When it comes to cooking carnitas, one of the key ingredients that sets this Mexican dish apart is lard. Cooking the pork in lard gives it a rich, indulgent flavor and crispy texture that is hard to resist.

But how long should you cook the carnitas in lard? The answer to this question depends on a few factors, including the size of the pork pieces and the cooking method you choose.

Typically, carnitas are cooked in lard on the stovetop or in the oven. If you’re using the stovetop method, it’s best to cook the pork at a low temperature for a long time. This allows the meat to become tender and the fat to render, resulting in melt-in-your-mouth carnitas.

If you prefer to use the oven, cooking times can vary. A common method is to cook the carnitas at a moderate temperature, around 325°F (163°C), for about 2 to 3 hours. This longer cooking time allows the pork to become fork-tender and develop a crispy exterior.

McCormick Street Taco Pork Carnitas Seasoning Mix, 1 oz
McCormick Street Taco Pork Carnitas Seasoning Mix, 1 oz
$6.00
Amazon.com
Amazon price updated: November 30, 2024 8:31 pm

However you choose to cook your carnitas in lard, the most important thing is to ensure that the pork reaches an internal temperature of 165°F (74°C) for food safety. Once cooked, remove the pork from the lard and let it rest for a few minutes before shredding or serving.

Note: Carnitas cooked in lard are undeniably delicious, but they are not the healthiest option due to the high fat content. Enjoy them in moderation as a treat or consider alternative cooking methods if you’re looking for a lighter version.

How to Make Carnitas in Lard

Carnitas, a popular Mexican dish made from pork, is traditionally cooked in lard. This cooking method results in tender and flavorful meat with a crispy crust. If you’re looking to make authentic carnitas at home, here’s how you can do it.

Ingredients:

• 2 pounds pork shoulder, cut into chunks
• 2 cups lard
• 1 onion, coarsely chopped
• 3 cloves garlic, minced
• 2 teaspoons salt
• 2 teaspoons dried oregano
• 1 teaspoon ground cumin
• 1 teaspoon ground coriander
• 1 tablespoon orange zest
• Freshly squeezed juice from 1 orange
• Freshly squeezed juice from 2 limes

Instructions:

1. In a large pot, melt the lard over medium heat. Add the onion and garlic, and cook until translucent.

2. Add the pork shoulder chunks to the pot and season with salt, oregano, cumin, and coriander. Stir well to coat the meat with the spices.

3. Cook the pork in the lard for about 2 hours, or until it is tender and easily shreds with a fork.

4. Once the pork is cooked, remove it from the pot and let it cool slightly. Using two forks, shred the meat into bite-sized pieces.

EPIC Organic Pork Fat, Keto Friendly, Whole30, 11oz Jar
EPIC Organic Pork Fat, Keto Friendly, Whole30, 11oz Jar
$13.89
Amazon.com
Amazon price updated: November 30, 2024 8:31 pm

5. In a separate bowl, combine the orange zest, orange juice, and lime juice. Pour this mixture over the shredded pork, and toss to coat the meat evenly.

See also  How to cook barley in pressure cooker

6. Heat a large frying pan over medium-high heat. Add a small amount of the rendered lard from the pot to the pan.

7. Working in batches, add the shredded pork to the frying pan and cook until the edges are crispy and golden brown.

8. Serve the carnitas in warm tortillas with your favorite toppings, such as salsa, avocado, and cilantro.

Enjoy your homemade carnitas cooked in lard, and experience the authentic flavors of Mexico!

Riega Organic Carnitas Street Taco Seasoning, Perfect Mix for Authentic Slow Cooker Shredded Pork Carnitas 1 Ounce (Pack of 8)
Riega Organic Carnitas Street Taco Seasoning, Perfect Mix for Authentic Slow Cooker Shredded Pork Carnitas 1 Ounce (Pack of 8)
$13.99
Amazon.com
Amazon price updated: November 30, 2024 8:31 pm

Choosing the Right Cut of Meat

When it comes to making carnitas, choosing the right cut of meat is key to achieving delicious, tender results. While there are several cuts of pork that can be used, some are more suitable than others for this traditional Mexican dish.

Pork Shoulder

The most popular cut of meat used for carnitas is pork shoulder, also known as pork butt or Boston butt. This cut comes from the upper shoulder of the pig and has a good amount of marbling, which adds to its flavor and juiciness. The shoulder is known for its tenderness and ideal fat content, making it the perfect choice for slow-cooking methods like carnitas.

When purchasing pork shoulder for carnitas, look for a well-marbled piece with a nice layer of fat on top. This fat will render down during the cooking process, keeping the meat moist and flavorful.

Pork Loin

Another option for making carnitas is pork loin, although it is not as commonly used as pork shoulder. The loin is a leaner cut of meat compared to the shoulder, so it may require more attention to prevent it from drying out during cooking.

If you choose to use pork loin for carnitas, it’s important to brine or marinade the meat beforehand to help retain moisture. Additionally, cooking the pork loin at a slightly lower temperature for a shorter period of time can also help prevent it from becoming dry.

Goya Manteca Refined Lard, 2.5 Pound
Goya Manteca Refined Lard, 2.5 Pound
$14.28
Amazon.com
Amazon price updated: November 30, 2024 8:31 pm

While pork loin can make delicious carnitas, it may not have the same level of richness and tenderness as pork shoulder. If you prefer a leaner option or have dietary restrictions, pork loin can still be a viable choice.

Tip: It’s always a good idea to consult with your local butcher or meat provider for advice on choosing the best cut of meat for carnitas. They can provide valuable recommendations and ensure that the meat you select is of the highest quality.

In conclusion, when making carnitas, pork shoulder is the preferred cut of meat due to its tenderness and fat content. However, pork loin can also be used with proper preparation and cooking techniques. Ultimately, the choice depends on personal preference and dietary considerations.

See also  Can you cook ravioli from frozen

Preparing the Meat for Cooking

Before cooking carnitas in lard, it is essential to properly prepare the meat to ensure a delicious and tender result. Follow these steps to prepare the meat:

1. Choose the Right Cut of Meat

For traditional carnitas, it is best to use pork shoulder or butt. These cuts are well-marbled and have enough fat content to create a succulent and flavorful dish.

Chata Pork Carnitas Pouch 8 Oz (Pack of 3)
Chata Pork Carnitas Pouch 8 Oz (Pack of 3)
$22.00
Amazon.com
Amazon price updated: November 30, 2024 8:31 pm

2. Trim and Cut the Meat

Start by trimming any excess fat from the pork shoulder or butt. Leave a thin layer of fat on the meat to enhance the flavor and juiciness. Once trimmed, cut the meat into 2-inch chunks. This size is ideal for slow cooking and ensuring even cooking throughout.

3. Season the Meat

Next, season the meat generously with salt and pepper. You can also add other spices and seasonings such as garlic powder, cumin, paprika, or oregano to enhance the flavor of the carnitas.

Tip: For an extra kick of flavor, marinate the meat overnight in a mixture of citrus juice (such as orange or lime) and spices before proceeding to the next step.

4. Sear the Meat

In a large, heavy-bottomed pot or Dutch oven, heat a few tablespoons of lard or vegetable oil over medium-high heat. Working in batches, add the seasoned meat to the pot and sear it on all sides until browned. Searing the meat adds depth of flavor and helps to create a crispy exterior.

Note: If you prefer a healthier version, you can skip the searing step and proceed directly to cooking the meat in lard.

South Chicago Packing Traditonal LARD Shortening, 42 Ounces, Specialty Baking Shortening and Cooking Fat
South Chicago Packing Traditonal LARD Shortening, 42 Ounces, Specialty Baking Shortening and Cooking Fat
$24.99
Amazon.com
Amazon price updated: November 30, 2024 8:31 pm

Once the meat is properly prepared, you are ready to proceed with the cooking process and transform the pork chunks into melt-in-your-mouth carnitas!

Seasoning the Meat

Before cooking the carnitas, it’s important to season the meat properly to enhance its flavor. Here’s how to do it:

  1. Start by choosing the type of pork meat you prefer, such as pork shoulder or pork butt. Trim any excess fat.
  2. In a small bowl, combine your desired seasonings. Some common options include:
    • Salt
    • Pepper
    • Cumin
    • Garlic powder
    • Paprika
    • Oregano
    • Cayenne pepper (for a spicy kick)
  3. Generously season the pork meat on all sides with the spice mixture. Make sure to rub it in well to evenly distribute the flavors.
  4. Cover the seasoned meat and refrigerate it for at least 2 hours or overnight. This allows the flavors to penetrate the meat and makes it more tender.

By seasoning the meat before cooking, you’ll ensure that every bite of your carnitas is packed with delicious flavor.

Cooking the Carnitas

Once you have prepped your pork for carnitas and melted your lard, it is time to start cooking. Follow these steps to cook the carnitas to perfection:

See also  How long to cook ditalini pasta

Step 1: Searing the Meat

Heat a large, heavy-bottomed pot or Dutch oven on medium-high heat. Add the pork pieces to the pot in a single layer, making sure not to overcrowd them. Allow the meat to sear for about 3-4 minutes on each side, until browned and caramelized.

Cornhusker Kitchen Berkshire Pork Fat Lard 1.5lbs
Cornhusker Kitchen Berkshire Pork Fat Lard 1.5lbs
$27.95
Amazon.com
Amazon price updated: November 30, 2024 8:31 pm

Step 2: Adding the Aromatics

Once the meat has browned, add the aromatics like onions, garlic, and bay leaves to the pot. Stir them in with the pork and let them cook for 2-3 minutes, until fragrant.

Step 3: Simmering in Lard

Next, pour in the melted lard until it covers the pork pieces completely. Reduce the heat to low and let the carnitas simmer in the lard for about 2-3 hours, until the meat is fork-tender and easily pulls apart.

Step 4: Shredding the Meat

Once the meat is cooked to perfection, remove it from the pot and transfer it to a cutting board or large plate. Use two forks or your hands to shred the meat into smaller pieces. Discard any excess fat or bones.

Step 5: Crisping the Carnitas

If you prefer your carnitas crispy, heat a separate skillet or frying pan on medium-high heat. Add a small amount of the rendered lard from the pot and place the shredded meat in the pan. Cook the carnitas for a few minutes on each side until they become crispy and golden brown.

Now that your carnitas are cooked and crispy, they are ready to be enjoyed! Serve them as taco fillings, in burritos, on top of rice or beans, or any other way you desire. The rich and tender meat will surely be a hit at any gathering or meal.

Q&A

How long should I cook carnitas in lard?

Cooking carnitas in lard typically takes about 2-3 hours.

What temperature should I cook carnitas in lard?

Carnitas are typically cooked at a low temperature of around 275-300°F (135-150°C).

Can I use a different type of fat instead of lard to cook carnitas?

Yes, you can use other types of fat like vegetable oil or pork fat to cook carnitas, but lard is the traditional choice and gives the best flavor and texture.

Do I need to refrigerate the lard after cooking carnitas?

Yes, after cooking carnitas in lard, it is important to strain and store the lard in the refrigerator for future use.

Can I cook carnitas in lard for a shorter amount of time?

Cooking carnitas for a shorter amount of time may result in tougher meat, so it is best to follow the recommended cooking time for tender and flavorful carnitas.

How long should carnitas be cooked in lard?

Carnitas should be cooked in lard for about 3 to 4 hours.