Do you love bacon? If so, you know that cooking it to perfection can be a bit tricky. Bacon can easily become overcooked and burnt, or it can come out undercooked and not crispy enough. One way to achieve the perfect bacon is by using a Blackstone griddle.
Blackstone griddles are known for their versatility and even cooking. They provide a large, flat cooking surface that allows you to cook bacon evenly and quickly. But how long should you actually cook bacon on a Blackstone griddle?
The answer to that question will depend on your personal preference. Some people like their bacon extra crispy, while others prefer it to be slightly chewy. As a general guideline, you can cook bacon on a Blackstone griddle for about 5-7 minutes per side. This should result in bacon that is crispy on the outside and tender on the inside.
Pro tip: To prevent your bacon from curling up while cooking, you can use a bacon press. Simply place the press on top of the bacon as it cooks, and it will help keep it flat.
Remember, cooking times may vary depending on the thickness of the bacon and the desired level of crispiness. The best way to find the perfect cooking time for your bacon is through trial and error. Keep an eye on the bacon as it cooks and adjust the cooking time accordingly. With a little practice, you’ll be able to achieve the perfect bacon every time you cook on your Blackstone griddle.
Important: Always use caution when cooking with a Blackstone griddle. The cooking surface can get extremely hot, so be sure to use oven mitts or a spatula to handle the bacon and avoid any potential burns.
How Long to Cook Bacon on Blackstone Griddle
When it comes to cooking bacon on a Blackstone griddle, the time and temperature are crucial for achieving that perfect crispy texture. Here’s a guide on how long to cook bacon on a Blackstone griddle:
Preparation
Before cooking the bacon, make sure to preheat the Blackstone griddle to medium-high heat. This will ensure that the bacon cooks evenly and avoids any uneven cooking or burning.
Cooking Time
On average, it takes about 3-4 minutes per side to cook bacon on a Blackstone griddle. Remember to flip the bacon halfway through to ensure it cooks evenly on both sides. The exact cooking time may vary depending on the thickness of the bacon and personal preference for crispiness.
Appearance
When the bacon starts to turn golden brown and crispy, it is a good indicator that it is almost done. Keep a close eye on the bacon during the cooking process to avoid any burning or overcooking.
Draining
After cooking, it’s essential to drain the bacon on a paper towel-lined plate to remove any excess grease. This will also help maintain its crispy texture and prevent it from becoming too greasy.
Now that you know how long to cook bacon on a Blackstone griddle, you can enjoy delicious, crispy bacon every time. Remember to adjust the cooking time based on thickness and personal preference for crispiness. Happy cooking!
Bacon Cooking Basics
When it comes to cooking bacon on a Blackstone griddle, there are a few key factors to consider to achieve perfect results. Follow these bacon cooking basics to ensure that your bacon turns out crispy, flavorful, and delicious every time.
- Preheat the griddle: Before cooking bacon, make sure to preheat your Blackstone griddle to medium-high heat. This will help ensure that the bacon cooks evenly and becomes crispy.
- Use the right pan: Choose a frying pan or griddle with a flat surface to cook the bacon. A flat surface allows for even heat distribution and helps prevent the bacon from curling up.
- Place the bacon strips: Lay the bacon strips on the preheated griddle, making sure to leave some space between each strip. This will allow for even cooking and prevent the strips from sticking together.
- Cooking time: Depending on your desired level of crispiness, cook the bacon for about 4-6 minutes per side. Flip the bacon halfway through to ensure even cooking. Keep in mind that thicker bacon slices may require slightly longer cooking times.
- Drain excess grease: As the bacon cooks, it will release fat and grease. Use a spatula or tongs to remove the cooked bacon from the griddle and place it on a paper towel-lined plate. This will help absorb excess grease and keep the bacon crispy.
- Serve and enjoy: Once the bacon is cooked and excess grease has been drained, it’s ready to serve. Enjoy it as a side dish, add it to sandwiches or salads, or use it as a topping for your favorite dishes.
By following these bacon cooking basics, you’ll be able to make the perfect bacon every time using your Blackstone griddle. Experiment with different cooking times and techniques to find your preferred level of crispiness and flavor. Happy cooking!
Preparing the Blackstone Griddle
Before you start cooking bacon on a Blackstone griddle, it’s important to properly prepare the surface to ensure even heat distribution and prevent sticking.
Step 1: Clean the Griddle
Start by cleaning the griddle using warm water and mild dish soap. Use a non-abrasive scrub brush or sponge to remove any dirt or residue. Rinse the griddle thoroughly and pat dry with a clean towel.
Step 2: Season the Griddle
Seasoning the griddle helps to create a natural non-stick surface and prevents rust. Apply a thin layer of cooking oil or a high-smoke point oil, such as grapeseed or vegetable oil, to the entire surface of the griddle. Use a cloth or paper towel to evenly spread the oil, making sure to cover all areas.
Step 3: Heat the Griddle
Turn on the heat source and preheat the griddle to the desired temperature. For cooking bacon, a medium-high heat setting is recommended. Allow the griddle to heat up for at least 10-15 minutes to ensure that it reaches the desired temperature evenly.
Step 4: Test the Surface
To check if the griddle is ready for cooking, sprinkle a few drops of water onto the surface. If the water sizzles and evaporates immediately, the griddle is hot enough to begin cooking. If the water sits or takes longer to evaporate, continue heating the griddle until the water reacts as described.
By following these steps, you can properly prepare your Blackstone griddle for cooking bacon, ensuring delicious crispy results every time!
Determining the Right Temperature
When cooking bacon on a Blackstone griddle, it is important to determine the right temperature to achieve the perfect results. The temperature you choose will depend on how crispy or chewy you prefer your bacon.
For crispy bacon, preheat your Blackstone griddle to medium-high heat, around 375-400 degrees Fahrenheit. This high temperature will quickly render the fat and crisp up the bacon strips. Cook the bacon for about 4-6 minutes per side, flipping halfway through, until it reaches your desired level of crispness.
If you prefer chewy bacon, a slightly lower temperature is recommended. Preheat your griddle to medium heat, around 325-350 degrees Fahrenheit. Cooking at a lower temperature will give the bacon a softer and chewier texture. Cook the bacon for about 6-8 minutes per side, again flipping halfway through, until it reaches your preferred level of doneness.
It is important to remember that cooking times may vary depending on the thickness of the bacon slices and the heat output of your specific Blackstone griddle. It is always a good idea to start with a lower temperature and adjust as needed to achieve your desired results.
Note: Always use caution when cooking bacon on a griddle as the hot grease can cause splattering and potential burns. It is recommended to wear protective gloves and use a splatter guard to minimize any risks.
Cooking Thick Cut Bacon
When it comes to cooking thick cut bacon on a Blackstone griddle, there are a few key steps to follow for the perfect crispy and delicious bacon.
- Preheat the Blackstone griddle to medium heat. It’s important to preheat properly to ensure even cooking.
- Place the thick cut bacon slices on the griddle. Make sure to space them out evenly and allow enough room for flipping.
- Cook the bacon for about 4-5 minutes per side. Thick cut bacon usually takes a bit longer to cook than regular bacon.
- Keep an eye on the bacon and flip it occasionally to ensure even cooking. If you prefer crispy bacon, cook it for a few minutes longer.
- Once the bacon reaches your desired level of crispiness, remove it from the griddle and place it on a paper towel-lined plate to drain excess grease.
- Allow the bacon to cool for a couple of minutes before serving, as it will continue to crisp up slightly.
Now you’re ready to enjoy your thick cut bacon cooked to perfection on the Blackstone griddle. Serve it with your favorite breakfast items or use it as a tasty addition to sandwiches and burgers.
Cooking Thin Cut Bacon
Thin cut bacon is a popular choice when it comes to cooking on a Blackstone griddle. The thin slices of bacon cook quickly and become crispy, making them perfect for adding to sandwiches, salads, or enjoying on their own.
Prepping the Bacon
Before you start cooking the thin cut bacon on your Blackstone griddle, it’s important to properly prepare the bacon slices. Take the bacon out of the package and separate the slices. If the slices are stuck together, you can gently pull them apart.
Pat the bacon slices dry with a paper towel to remove any excess moisture. This step is important to ensure that the bacon cooks evenly and becomes crispy. You can also season the bacon slices with your favorite spices or seasonings if desired. Common choices include black pepper, garlic powder, or smoked paprika.
Cooking Process
When cooking thin cut bacon on a Blackstone griddle, it’s best to start with a preheated griddle. Set the heat to medium-high and let the griddle heat up for a few minutes.
Place the bacon slices on the hot griddle, making sure not to overcrowd the surface. Bacon slices will shrink as they cook, so leave some space between them. It’s recommended to use tongs or a spatula to flip the bacon slices occasionally to ensure even cooking.
Cook the bacon for about 4-6 minutes per side, or until it reaches your preferred level of crispiness. Keep in mind that the cooking time may vary depending on the thickness of the bacon slices and the temperature of your griddle.
Once the bacon is cooked to your liking, transfer it to a plate lined with paper towels to drain any excess grease. Blot the top of the bacon slices with another paper towel to remove any remaining grease.
Now, your thin cut bacon is ready to be enjoyed! Serve it as a side dish with breakfast, add it to sandwiches or salads, or use it as a topping for burgers or pizzas. The options are endless!
Remember to always exercise caution when working with hot surfaces, and never leave your griddle unattended while cooking.
Q&A
What is the recommended cooking time for bacon on a blackstone griddle?
The recommended cooking time for bacon on a blackstone griddle is approximately 5-7 minutes.
How long should I cook bacon on a blackstone griddle to get it crispy?
To get crispy bacon on a blackstone griddle, you should cook it for about 7-10 minutes.
Can I cook bacon on a blackstone griddle for a shorter amount of time?
Yes, you can cook bacon on a blackstone griddle for a shorter amount of time if you prefer it to be less crispy. Cooking it for 3-5 minutes will give you a softer texture.
What temperature should the blackstone griddle be set to when cooking bacon?
The blackstone griddle should be set to medium-high heat, around 375-400°F (190-204°C), when cooking bacon.